Job Description
Job Summary: The purpose of the Tufting Creeler is to ensure yarn is supplied to tufting machines from creels or beams to produce first quality carpet.
Essential Duties & Responsibilities: - Creel yarn packages on all creel feed machines following direction of leadership
- Splice or tie in yarn packages or beam sets in a safe and timely manner.
- Run Bitwinder as needed if applicable.
- Run knots through after beam change and verify machine thread-up if applicable.
- Pull yarn off of beams and remove beam weights at the end of each shop order if applicable.
- Verify beam placement in beam rack if applicable.
- Use beam splicer to creel a new beam set after beam change if applicable.
- Verify splices and knots for durability.
- Remove empty tubes from the creel and place them in designated area.
- Remove from the creel packages of old lots and place them as designated by leadership in boxes or prepare them for pack-out.
- Help tufting machine operators with backing changes.
- Relieve tufting machine operators as necessary.
- Fix pull tights and ends out in the creel and potentially blow yarn back to machine through creel tube using air nozzle.
- Check all beamed and creeled yarn for proper lot number and color number.
- Apply beam weights after beam change if applicable.
- Assist in keeping work area in a clean and orderly manner.
Performance Expectations (if applicable): - Standing is required 80% of time for 30 to 45 minutes per time.
- Pulling of yarn from beams is required 20% of shift if applicable.
- Reaching is required for yarn 50 to 60% of shift.
- Stooping is required 10% of shift for 30-second intervals.
- Bending is required to creel 10 to 20% of time, and lifting cones 30% of time.
- Must be able to use air splicer 30% of shift.
- Must be able to use snips and/or scissors 5% of shift.
- Must be able to distinguish colors and shade differences.
- Lifting is required of cones of yarn weighing 10 to 12 lbs throughout shift.
- Occasionally required to climb, balance, and kneel.
Experience/Education Requirements: - High school diploma or equivalent preferred.
- Must be able to read, write and do basic addition, subtraction, division and multiplication.
- Computer knowledge or data entry skills are a necessary part of the job but will train.
Other Requirements: - Overtime is required on occasion.
- All accidents must be reported immediately.
- Perform any other duties as assigned.
- Safety equipment must be worn as required.
- Report to management any quality, safety, or potential problems encountered while performing the job.
- Responsible for quality and safety of his/her own output.
Engineered Floors, LLC
Job Tags
Immediate start, Shift work,